Bug #3394
PPPoE backup connection restart failure
Status: | CLOSED | Start date: | ||
---|---|---|---|---|
Priority: | Normal | Due date: | ||
Assignee: | - | % Done: | 100% | |
Category: | nethserver-firewall-base | |||
Target version: | v6.7 | |||
Security class: | Resolution: | |||
Affected version: | v6.7 | NEEDINFO: | No |
Description
When a PPPoE connection is used in a multiwan setup, if the link goes down and up again, traffic is no longer sent to the pppoe connection.
Workaround: shorewall restart
Associated revisions
PPPoE multiwan: reset routing tables on up/down. Refs #3394
PPPoE multiwan: reset routing tables on up/down. Refs #3394
History
#1 Updated by Filippo Carletti about 5 years ago
- Status changed from NEW to TRIAGED
- Assignee set to Filippo Carletti
- % Done changed from 0 to 20
To restore the correct routing tables after a connection failure we can restart shorewall in the ip-up event.
#2 Updated by Filippo Carletti about 5 years ago
- Status changed from TRIAGED to ON_DEV
- % Done changed from 20 to 30
#3 Updated by Filippo Carletti about 5 years ago
- Status changed from ON_DEV to MODIFIED
- Assignee deleted (
Filippo Carletti) - % Done changed from 30 to 60
#4 Updated by Filippo Carletti about 5 years ago
In nethserver-testing:
nethserver-firewall-base-2.10.4-1.3.g1f58ad6.ns6.noarch.rpm
nethserver-firewall-base-ui-2.10.4-1.3.g1f58ad6.ns6.noarch.rpm
- Configure a machine with a red interface
- Add a PPPoE connection
- Configure multiwan between PPPoE
- Simulate a PPPoE fault:
kill -9 of the pppoe porcess
- Check the route table for PPPoE provider is empty
ip ro sh ta pppoe_provider_name
- Wait that pppoe comes back and check the provider table is correct
ip ro sh ta pppoe_provider_name
#5 Updated by Filippo Carletti about 5 years ago
- Status changed from MODIFIED to ON_QA
- % Done changed from 60 to 70
#6 Updated by Giacomo Sanchietti about 5 years ago
- Status changed from ON_QA to VERIFIED
- % Done changed from 70 to 90
Tested on the field.
#7 Updated by Giacomo Sanchietti about 5 years ago
- Status changed from VERIFIED to CLOSED
- % Done changed from 90 to 100
Released in 6.7/nethserver-updates:
- nethserver-firewall-base-2.10.5-1.ns6.noarch.rpm
- nethserver-firewall-base-ui-2.10.5-1.ns6.noarch.rpm