Enhancement #3225
Update ntopng
Status: | CLOSED | Start date: | ||
---|---|---|---|---|
Priority: | Normal | Due date: | ||
Assignee: | - | % Done: | 100% | |
Category: | nethserver-ntopng | |||
Target version: | v6.6 | |||
Resolution: | NEEDINFO: | No |
Description
Update ntopng to version 2.
Also take care of:- user authentication
- start/stop service with init.d
- enable only community mode
http://community.nethserver.org/t/upgrade-to-ntopng-v2-0/1274
Related issues
Associated revisions
spec: requires ntopng > 2 Refs #3225
ntopng.conf: update for release 2. Refs #3225
History
#1 Updated by Giacomo Sanchietti about 6 years ago
- Description updated (diff)
- Category set to nethserver-ntopng
- Status changed from NEW to TRIAGED
- Target version set to v6.6
- % Done changed from 0 to 20
#2 Updated by Giacomo Sanchietti about 6 years ago
- Related to Enhancement #3172: Bandwidth monitor (ntopng) : remove modify password form from nethserver interface added
#3 Updated by Giacomo Sanchietti about 6 years ago
- Description updated (diff)
#4 Updated by Giacomo Sanchietti about 6 years ago
- Status changed from TRIAGED to ON_DEV
- Assignee set to Giacomo Sanchietti
- % Done changed from 20 to 30
#5 Updated by Giacomo Sanchietti about 6 years ago
- Status changed from ON_DEV to MODIFIED
- % Done changed from 30 to 60
ntopn will always start in licensed mode for the first 10 minutes, then the application will switch to community edition.
I also used the --community
switch to start always in community mode (as stated by ntopng output), but it doesn't work.
#6 Updated by Giacomo Sanchietti about 6 years ago
- Status changed from MODIFIED to ON_QA
- Assignee deleted (
Giacomo Sanchietti) - % Done changed from 60 to 70
- nethserver-ntopng-1.2.2-1.4.g673e678.ns6.noarch.rpm
- ntopng-2.0.150531-164.x86_64.rpm
- ntopng-data-2.0.150531-164.noarch.rpm
- GeoIP-1.6.5-1.el6.x86_64.rpm
- GeoIP-GeoLite-data-2015.04-2.el6.noarch.rpm
- GeoIP-GeoLite-data-extra-2015.04-2.el6.noarch.rpm
- geoipupdate-2.2.1-2.el6.x86_64.rpm
- hiredis-0.10.1-3.el6.x86_64.rpm
- zeromq3-3.2.5-1.el6.x86_64.rpm
- Install the package on a clean machine
- Check ntopng works with and without authentication
- Install old nethserver-ntopng package
- Update to the new one
- Check ntopng still works with and without authentication
#7 Updated by dz0 0te about 6 years ago
- Assignee set to dz0 0te
#8 Updated by dz0 0te about 6 years ago
- Status changed from ON_QA to VERIFIED
- Assignee deleted (
dz0 0te) - % Done changed from 70 to 90
System and Package Version installed
VM KVM - Clean install of Nethserver 6.6 fully updated
Package Installed: nethserver-ntopng-1.2.2-1.ns6.noarch
Other Package installed: Bandwidth monitor
Test Original Problem
Enhancement
Install Updated Package
yum --enablerepo=nethserver-testing install nethserver-ntopng-1.2.2-1.4.g673e678.ns6
Test Results after update
Test case 1 - clean machine
Check ntopng works with and without authentication -> OK
Test case 2
Install old nethserver-ntopng package, Update to the new one
Check ntopng still works with and without authentication -> OK
Verified or Reopen
Verified
Note
...
#9 Updated by Giacomo Sanchietti about 6 years ago
- Status changed from VERIFIED to CLOSED
- % Done changed from 90 to 100
- nethserver-ntopng-1.2.3-1.ns6.noarch.rpm
- ntopng-2.0.150531-164.x86_64.rpm
- ntopng-data-2.0.150531-164.noarch.rpm
- GeoIP-1.6.5-1.el6.x86_64.rpm
- GeoIP-GeoLite-data-2015.04-2.el6.noarch.rpm
- GeoIP-GeoLite-data-extra-2015.04-2.el6.noarch.rpm
- geoipupdate-2.2.1-2.el6.x86_64.rpm
- hiredis-0.10.1-3.el6.x86_64.rpm
- zeromq3-3.2.5-1.el6.x86_64.rpm
#10 Updated by Alessio Fattorini almost 6 years ago
- Description updated (diff)