Enhancement #3397
Dashboard/UPS: no info for some UPS models
Status: | CLOSED | Start date: | ||
---|---|---|---|---|
Priority: | Normal | Due date: | ||
Assignee: | - | % Done: | 100% | |
Category: | nethserver-nut | |||
Target version: | v6.7 | |||
Resolution: | NEEDINFO: | No |
Description
The UPS page of the dashboard to see ups status sometimes shows the following messages even if an ups is correctly configured and running:
No UPS information available
The root cause of the problem is that some ups do not report their model name when queried.
Associated revisions
Dashboard/UPS: display info for unspecified models. Refs #3397
Dashboard/UPS: display info for unspecified models. Refs #3397
History
#1 Updated by Filippo Carletti about 5 years ago
- Category set to nethserver-nut
- Status changed from NEW to TRIAGED
- Assignee set to Filippo Carletti
- Target version set to v6.7
- % Done changed from 0 to 20
A propose to enhance the dashboard to display "Model: -" if the model is not reported.
#2 Updated by Filippo Carletti about 5 years ago
- Status changed from TRIAGED to ON_DEV
- % Done changed from 20 to 30
#3 Updated by Filippo Carletti about 5 years ago
- Status changed from ON_DEV to MODIFIED
- Assignee deleted (
Filippo Carletti) - % Done changed from 30 to 60
#4 Updated by Filippo Carletti about 5 years ago
- Status changed from MODIFIED to ON_QA
- % Done changed from 60 to 70
Package in nethserver-testing:
nethserver-nut-1.0.11-1.1.gc3ff52f.ns6.noarch.rpm
Verification:
1. update a system with no ups configured: dashboard should still say No UPS information available
2. update a system with a good ups: dashboard should show ups status as before
3. update a system with a bad ups: dashboard should show ups status
#5 Updated by Nicola Rauso about 5 years ago
- Assignee set to Nicola Rauso
#6 Updated by Nicola Rauso about 5 years ago
- Status changed from ON_QA to VERIFIED
- Assignee deleted (
Nicola Rauso) - % Done changed from 70 to 90
Verification:
1. update a system with no ups configured: dashboard should still say No UPS information available
2. update a system with a good ups: dashboard should show ups status as before
3. update a system with a bad ups: dashboard should show ups status
Tested: it works flawlessly in all scenarios.
#7 Updated by Giacomo Sanchietti about 5 years ago
- Status changed from VERIFIED to CLOSED
- % Done changed from 90 to 100
- 6.7/updates: nethserver-nut-1.0.12-1.ns6.noarch.rpm
- 6.8/base: nethserver-nut-1.0.12-1.ns6.noarch.rpm
- 7.2.1511/testing: nethserver-nut-1.0.12-1.3.g5aef28b.ns7.noarch.rpm