Bug #3051
UPS in slave mode always reports an error when saving from Web UI
Status: | CLOSED | Start date: | ||
---|---|---|---|---|
Priority: | Normal | Due date: | ||
Assignee: | - | % Done: | 100% | |
Category: | nethserver-nut | |||
Target version: | v6.6 | |||
Security class: | Resolution: | |||
Affected version: | v6.5 | NEEDINFO: | No |
Description
When configuring an UPS in slave mode, after saving the configuration from web interface, the system always report a generic error.
But the configuration is correctly applied.
The bug is caused by a bad init script belonging to nut-client package: /etc/rc.d/init.d/ups
always exist with code 1 even if the client is correctly restarted.
History
#1 Updated by Giacomo Sanchietti over 6 years ago
- Category set to nethserver-nut
- Status changed from NEW to TRIAGED
- Target version set to v6.6
- % Done changed from 0 to 20
- Affected version set to v6.5
Updates with latest package from EPEL: nut-client-2.6.5-2.el6.i686 [120 KiB]
Changelog by Michal Hlavinka (2013-05-15): - fix return code from init script (#962937)
#2 Updated by Giacomo Sanchietti over 6 years ago
- Status changed from TRIAGED to ON_DEV
- Assignee set to Filippo Carletti
- % Done changed from 20 to 30
#3 Updated by Filippo Carletti over 6 years ago
- Status changed from ON_DEV to MODIFIED
- % Done changed from 30 to 60
Nut package updated from upstream:
nut-2.6.5-2.el6.x86_64.rpm
nut-client-2.6.5-2.el6.x86_64.rpm
#4 Updated by Filippo Carletti over 6 years ago
- Status changed from MODIFIED to ON_QA
- % Done changed from 60 to 70
Disable and re-enable ups, no error should be reported.
#5 Updated by Filippo Carletti over 6 years ago
- Status changed from ON_QA to VERIFIED
- % Done changed from 70 to 90
ups enabled, no errors.
#6 Updated by Filippo Carletti over 6 years ago
- Status changed from VERIFIED to CLOSED
- % Done changed from 90 to 100
Tested on a fresh install of 6.6, slave connected to master and no error displayed.
#7 Updated by Giacomo Sanchietti over 6 years ago
- Subject changed from UPS in slave mode always reports and error when saving from Web UI to UPS in slave mode always reports an error when saving from Web UI
#8 Updated by Giacomo Sanchietti over 6 years ago
- Assignee deleted (
Filippo Carletti)